AVAって何の略ですか?
本当に何もありません。しかし、レタリングの対称性により、非常に素晴らしいロゴが作成されます。ただし、 AVAでは重要な基本的価値観の範囲内で活動しているため、次のことを支持していると言えるでしょう。
- 専門知識
- コミュニティ
- ビジョン
- 誠実さ
- 生涯学習
テクニカル サポートがログ ファイルの送信を要求するのはなぜですか?
当社がお客様に要求するログ ファイルには 2 種類あります。通常、これは問題が発生した場合に行われます。
タイプ 1: AVAログ - これは、ソフトウェアがクラッシュした正確な瞬間と、ユーザーがその時に何をしていたかを正確に特定するのに役立ちます。
タイプ 2:クラッシュ ログ - これは、クラッシュ時にソフトウェアで何が起こっていたのかを正確に示します。バックグラウンド タスクが問題の原因となる場合があるため、クラッシュを繰り返す方法を知ることができます。
AVAからサーバーに直接保存しても大丈夫ですか?
これは可能ですが、推奨されるワークフローではありません。これは、保存中にサーバーとデザイン ステーション間の接続が切断されると、ファイルが破損する可能性があるためです。
ファイルをサーバーからデスクトップにドラッグすることをお勧めします。次に、作業中にファイルをデスクトップに保存します。ファイルでの作業が終了したら、ファイルをデスクトップからサーバーにドラッグできます。
これははるかに安全な作業方法です。
Mac® でゲスト アクセスを許可するにはどうすればよいですか?
ユーザーがゲストとしてシステムに接続できるようにする場合は、 AVA Digital Print Rip を実行するシステムをセットアップする場合に特に便利です。次の手順を実行する必要があります。
- [メニュー] > [システム設定] > [ユーザーとグループ] に移動します。
南京錠をクリックしてロックを解除し、ゲスト ユーザーをクリックして、[ゲスト ユーザーに共有フォルダーへの接続を許可する] チェックボックスをオンにします (以下を参照)。
AVAどの言語をサポートしていますか?
AVA 8 つの言語をサポートしています。現在、すべての人が好む言語をサポートしているわけではありませんが、Mac®OS の残りの部分を好みの言語で維持しながら、サポートされている言語の 1 つでAVAを実行する方法があります。
現在サポートされている言語は次のとおりです。
- 英語
- フランス語
- イタリアの
- スペイン語
- ドイツ人
- ロシア
- 日本語
- 中国語
ava3 ファイルと ava4 ファイルの違いは何ですか?
.ava3 ファイル形式は古いレガシー形式であり、最新のソフトウェアの新しい機能の多くは保存されません。
AVA常にAVA 4 形式を使用することをお勧めします。
.ava3 形式は、ava4 形式をサポートしていない古いバージョンのAVAでファイルが開かれる場合に備えて、ソフトウェアに保持されます。
フローティング ウィンドウがすべて消えたのはなぜですか?
考えられる答えは 2 つあります。
- デザイン ウィンドウのツールバーにある [フローティング ウィンドウを非表示] アイコンを誤って押してしまいました。元に戻すには、このボタンをもう一度クリックしてください。これが再び起こらないようにするには、そのオプションをツールバーから削除します。
- ファイルを閉じるときに Option キーを押した。これを行うと、アプリケーション内のすべてのウィンドウが閉じられます。再度開くには、[ウィンドウ] メニューに移動し、開きたいウィンドウを選択します。
Mac®OS アップデートを実行した後、システムの動作が遅くなるのはなぜですか?
すべてのファイルのインデックスを再作成しているため、
AVAでタブ付きウィンドウを使用するにはどうすればよいですか?
Minimise your screen clutter and take advantage of this Mac®OS feature within your AVA software. File tabs help you organise multiple windows within one application into one easy-to-navigate window.
Mac®OS Monterey and below
To switch on this feature:
- Go to Menu > System Settings
- Click on the General icon
- Change ‘Prefer tabs’ to Always
- In AVA, go to the View Menu and select Show Tab Bar
Now, when you open files into AVA they will open into the same Design Window, but will be separated by tabs, creating a clean and organised working environment.
Tip: To view all open tabs in AVA, go to the View Menu and select Show All Tabs
Occasionally, when completing some tasks such as putting a file into repeat using the Carbon Copy from Crop Box method, separate Design Windows may be desirable. You can split windows by going to Window Menu > Move Tab to New Window, or you can simply drag a tab out from the window to separate it.
To merge separated Design Windows, go to Window Menu > Merge All Windows.
DeleteMac®OS Ventura
To switch on this feature:
- Go to Menu > System Settings > Desktop & Dock
- Change ‘Prefer tabs’ to Always
- In AVA, go to the View Menu and select Show Tab Bar
Now, when you open files into AVA they will open into the same Design Window, but will be separated by tabs, creating a clean and organised working environment.
Tip: To view all open tabs in AVA, go to the View Menu and select Show All Tabs
Occasionally, when completing some tasks such as putting a file into repeat using the Carbon Copy from Crop Box method, separate Design Windows may be desirable. You can split windows by going to Window Menu > Move Tab to New Window, or you can simply drag a tab out from the window to separate it.
To merge separated Design Windows, go to Window Menu > Merge All Windows.
Delete「ドキュメント パレット」とは何ですか?なぜ便利ですか?
Each document in AVA can contain individual and file specific settings in the form of a customisable Palette. This is ideal for storing dot gains, document specific filters, tools, selections and PDF documentation.
Not only does this create a streamlined workflow, but it also reduces the risk of you losing vital information during file transfer. In conjunction with the automatic saving of overprint and substrate settings, this palette can be used to retain all the relevant information relating to the file in one place.
Creating a Document Palette
- Go to File Menu > Show Document Palette.
- Build your Palette.
- Save the document in .ava4 format.
These settings will now be saved with the document and can be easily recalled, even if the file is opened on a different computer.
This Palette can now be shared with your colleagues.
Spotlight で検索できるAVAファイルのメタデータは何ですか?
A considerable amount of useful information can be attached to files via this window. It provides a convenient way to record details such as the author, company and the copyright details of individual files. These notes can then be used to group and organise your files, as the information is searchable within the Finder, and can also be viewed in the AVA Productivity Manager module.
Applying searchable notes to a file
There are two ways to open the Notes. You can either go to the File Menu and select ‘Notes…’ Or, you can customise the toolbar of your Design Window and add the above icon to it. A window opens and displays any information which has been applied in the Default Notes Settings .
The date of creation (not available in the Default Notes Window) is automatically recorded in the Creation Date field and comes directly from the time and date set on your Mac®. You can click on the ‘Today’ button beside it to set it to todays date or you can type it in manually. Alternatively, use the arrows adjoining the Creation Date field to alter the selected date.
The Notes will enhance your design management in terms of file location and exchange. The notes will automatically be saved with the file as long as it is in .ava4 format, and these can then be searched on using the Finder. For more details on this please see the Using the Finder to search for files and What is the Spotlight Importer and how do I use it? articles. If you use AVA Colour, you can use Dynamic Text to display the Notes in the Layout Window.
ウィンドウ メニューで開いているドキュメントの横にあるさまざまなアイコンは何を意味しますか?
When working with several designs at the same time, it can be hard to keep track of the status of each design, whether some have unsaved changes; some have been minimised; or some are just hidden behind others that are open.
AVA includes a number of document marks and icons within the software to keep you up to date on the status of your open files. This labelling system allows you to easily identify their status and whether any action is required.
The following document marks are displayed next to the names of files in the Window Menu:
- A diamond indicates that the document window has been minimised into the Dock
- A tick identifies the active document
- A bullet point indicates that the document contains unsaved changes
As well as the bullet point in the Window Menu, a dot appears in the close button of a document when it contains unsaved changes.
Proxy icons
The toolbar of all document windows in AVA show an icon of the document they represent. This is known as a proxy icon. If the document has not been modified, this icon can be dragged and dropped in a new location - just like a document in the Finder Window. If the document has been modified, the icon is displayed as greyed out and cannot be dragged until the document has been saved.
At any time, regardless of whether you have made changes to the document, you can click on the title of the document while holding down ⌘ (command key) on the keyboard, to reveal the path to the file.
You can then select a folder from this path menu and it will automatically open in the Finder Window. This can be useful for many reasons and helps for example, if you have double clicked a file in the Finder Window to open it, and have forgotten it's location. It can also be useful when trying to locate a design which is stored in the same folder as the open design.
ドックのAVAアプリケーション アイコンの横にある赤い点は何ですか?
AVAのメッセージング システム
ファイル ブラウザとは何ですか? それはワークフローにどのように役立ちますか?
The Filter Browser is an integrated window, allowing you to create and store different combinations of filters. These can range from creative filters to production process simulations to textures.
The possibilities are endless when you use the Filter Browser alongside our Palette technology. You can access the browser either from the Layer Menu or from your customisable toolbar.
To open the Filter Browser go to the Layer Menu > Filter Browser. Alternatively you can add shortcut for it to the toolbar of your Design Window.
The Filter Browser has three parts: a filter set list at the top; a filter settings area in the middle; and a preview and application part at the bottom. The size of the whole window can be adjusted by dragging the bottom right corner of the window, and the size of the top and middle sections can be adjusted by dragging the handle which is positioned between them.
How to create filter sets

Alternatively, you can click the + icon to the right of this menu. Both options add a new filter set to the browser called Untitled:


Changes to the settings will be previewed in the Design Window in real time.
You can add multiple filter effects together to produce unique results. For example, if we wanted to add a Blur to the Kaleidoscope effect above, we simply need to click the + icon near the bottom of the window:

When this button is clicked, the present filter will be duplicated:

Use the dropdown menu to select your next filter. In this case it would be Blur Gaussian:

Adjust the settings of each of the filters contained within the filter set until you achieve the effect you want in the design.
DeleteNaming filter sets
When you are happy with the results, you should name the filter set by double clicking on the work Untitled in the top part of the window. We recommend you've the filter set a name which reflects to effect it creates:

Naming the filter sets is important because these names also appear in the Brushes Library where you can paint with the filters, and apply the effects in a subtle way to specific areas as opposed to the whole file or within a selection.
DeleteSwapping the order of filters within a filter set
The order of the filters within a filter set will alter the overall effect. If you want to change the order in which they are applied, use the arrows located to the left of each filter.
Applying the filter to your design
If there are no selections in your design the filter will be applied to the active layer(s) over the whole design. If there is a selection in the file, the effect will only be applied inside this selection on the active layer(s).
To apply the filter effect to the file, use the New Layer or Apply buttons in the bottom right hand corner of the window:

- New Layer - will apply the effect to a new layer in the Layers Palette
- Apply - will apply the effect to the active layer(s)
Saving specific filter settings to a Palette
Palettes are a great way of saving a selections of filter settings to use in other files. The settings can be added as a new Palette Button or they can be added to existing Palette Buttons which results in a combination of actions which can be later applied to other designs at the click of a button.
- Go to File Menu > New > Palette.
- Click on the filter set you want to add to a Palette.
- Drag the setting handler located at the bottom right of the window to the Palette. This will create a button.
- Once the filter is added to a button in a Palette, you can edit the filter further by clicking on the icon to the right of the action:
- To apply this filter to any design, simply click on your newly created button.
Troubleshooting
Why is my Filter Browser empty?
The Filter Browser is empty when AVA is installed on new systems because the idea behind our Filter Browser is the user creates the filters themselves using the New Filter Set option in the Action Menu. You can also Save and Load your filters from one computer to another using the same menu.
進行状況ウィンドウはファイルについて何を示しますか?
AVA内のファイルに対してタスクが実行されると、タイトル バーから進捗シートがドロップダウンして、タスクの進行状況を示します。このシートはタスクが実行されている実際のファイルに添付されているため、複数のタスクを同時に実行している場合に、どのファイルでどのタスクが実行されているかが明確にわかります。
AVAでは、進捗シートに加えて、デザイン ウィンドウの左下隅にアニメーションの日時計アイコンが表示されます。タスクが進行すると、ダイヤルアイコンが時計のように回転します。アクションが完了すると、アイコンのアニメーションは停止し、別のタスクが開始されるまで静止したままになります。
進行状況シートと進行状況インジケーターはどちらも、特定のファイルのタスクが進行中は、そのファイルに対して完了するまで他のタスクを同時に実行できないことを通知することを目的としています。進行状況インジケーターが長時間回転しているように見える場合、または特定の機能を実行した後に他の機能にアクセスできない場合は、カーソルを進行状況インジケーターの上に移動し、そこにホバーします。メッセージ タグが表示され、アクションが進行中である場合はその内容が示されます。
消去