Сохранение документа

Сохранение файлов в AVA


В меню «Файл» вы найдете две опции процесса сохранения файла — «Сохранить» и «Сохранить как». «Сохранить» запишет поверх существующего файла, а «Сохранить как» даст вам возможность переименовать файл и сделать его новую копию, оставив исходную точку в неприкосновенности.


Сохранять

Это обновит открытый файл, над которым вы работаете, с учетом последних внесенных вами изменений, перезаписав ранее сохраненную версию. Он также применит предварительный просмотр дизайна в QuickLook к значку файла, чтобы его было легче распознать в Finder.

Когда на экране открывается новый дизайн, имя файла — «Без названия». При первом сохранении этого дизайна появится лист сохранения, позволяющий выбрать имя, формат файла и желаемое местоположение.

Не забудьте сохранить файл, когда закончите работать над ним в течение дня, выбрав «Меню «Файл» > «Сохранить» или нажав ⌘S.

Примечание . AVA автоматически сохраняет любые изменения, которые вы вносите в файл в фоновом режиме в те периоды, когда вы над ним активно не работаете. Это гарантирует отсутствие потери работы в случае сбоя компьютера или отключения электроэнергии, и ваш файл снова откроется в том виде, в котором он был в последний раз открыт при перезапуске AVA .

Окно сохранения использует службы навигации, которые позволяют вам подключиться к серверу или смонтировать диск, пока окно все еще открыто, поэтому вы не ограничены сохранением только на внутренний жесткий диск.

При повторном открытии файла, сохраненного в формате AVA , он запоминает и восстанавливает множество определенных настроек просмотра, которые действовали на момент последнего использования файла. Некоторыми примерами этого являются видимые слои, предупреждения и просмотренные цветовые решения в момент сохранения.

Сохранить как

Эта опция позволяет вам создать копию файла, над которым вы сейчас работаете, чтобы внести изменения в имя, формат или местоположение.

  1. Перейдите в меню «Файл» > «Сохранить как».
  2. Введите имя дизайна и выберите папку назначения или диск, на котором будет сохранен дизайн. Специальные языковые символы, такие как акценты, кириллица или японские символы, обрабатываются правильно и сохраняют правильные характеристики.
  3. Вы можете сохранить дизайн в любом из перечисленных форматов. Файлы AVA следует сохранять как ava4.

Примечание . Различные форматы файлов более подробно описаны в отдельных статьях. Просто выполните поиск по формату файла, о котором вы хотите прочитать. Например, если вы выполняете поиск по Tiff, вы найдете статью о форматах файлов Tiff, в которой описываются файлы tiff и большие файлы tiff.

Сохранить и Сохранить как работают в фоновом режиме, что позволяет вам продолжать другую работу во время сохранения проекта.

AVA автоматически добавляет расширение файла при сохранении документов. Например, если вы сохраняете файл в формате Tiff, выберите формат файла в окне «Сохранить» и добавьте расширение .tif.

Часто задаваемые вопросы : Почему я не могу сохранить игру на свой сервер?

Перейдите в меню AVA > Настройки и выберите «Формат файла», а на вкладке «Экспорт» снимите флажок «Создать собственный значок при сохранении».

Теперь вы сможете сохранять файлы на свой (не Apple) сервер.

Сохранить объединенную копию как...

Save Combined Copy As: Exporting the Layout Window to view in other applications You can save a version of all the visible layers in your design or Layout Window,...

You can save a version of all the visible layers in your design or Layout Window, combined together into one image layer and saved in a format compatible with most third party softwares. The combined image is created using a profile and when saved, this profile accompanies the design so it will look similar when opened on other systems.


Saving the file

Follow the steps below to ensure your combined copy looks similar to the original artwork.

  1. Open the document and go to the window you wish to export from (Design or Layout Window).
  2. From the File Menu go to ‘Save Combined Copy As...’
  3. Select the format you want to save the file as and if you are saving from the Layout Window select the required resolution (saving from the design window will create a file the same resolution as the source document). Click Save.

Note: The output might appear slightly different to the AVA file but we expect it to be reasonably close to how it appeared in AVA. Files saved this way will appear wrong if reopened into AVA as the Viewing Conditions will be applied again.

The design will be exported in the number of repeats currently being viewed. Therefore if you need to send the file including the complete repeat area and drop, simply view the relevant number of repeats across and down with the correct drop setting before saving.

Specifying the profile to be used with Save Combined Copy As...

You do not need to specify a profile as AVA will automatically apply a generic profile. However, if you wish to choose the profile that will be applied when using Save Combined Copy As… select AVA Menu > Settings and select the File Format button. Click on the Export tab and press the Set button to locate the profile you wish to use.

Note: The resulting image is created in the colourspace of the profile, for example if you have an RGB profile set, AVA will create an RGB file.

Upon pressing Set, a Finder window opens allowing you to navigate to your preferred profile.

Note: The profile must contain a separation table and be in icc format. You can use profiles located at Hard drive > System > Library > ColorSync > Profiles if you wish. We recommend you select the Generic RGB 1998 profile to make an RGB image upon save, or the Generic CMYK profile to make a CMYK image. Click Open to set your selected profile as the profile to be embedded when using Save Combined Copy As… and your profile will be set in the Settings pane and applied to every file saved in this way.


Did you know... 

This function could be useful within a Palette

Saving combined copies has for a long time been an integral part of many workflows, allowing you to easily export designs and Layout Windows in popular formats including PDF and JPEG. Hereby, the viewing conditions of your system are embedded. This provides an improved visual match when opening the files into third party applications such as Preview.

In combination with the innovative Palette Technology, especially the looping functionalities, you can streamline workflows such as exporting all your colourways in different formats with the click of a single button.

You can find this Palette Handler in AVA Menu > Settings > Menus > File > Save. Drag it to your Palette, access the settings and tick Save Combined Copy.

To get inspired and find out more, contact our Technical Support Team.

The Movie


Автосохранение

Autosave Autosave is a feature which automatically saves a dirty file (any file with unsav...

Autosave is a feature which automatically saves a dirty file (any file with unsaved changes) in the background when you are not working on it. Therefore, if you simply open a file and look at it, no autosave occurs. Similarly, as you are working on the file, no autosave occurs, but as soon as you stop working, the file is autosaved. 


This means that in the unfortunate event that your computer crashes or you suffer a power failure, you will not lose any work. When you re-launch AVA the file will re-open and will contain all the changes you had made to it.

You can choose to turn this feature on or off per document, and the state of the function (on or off) is saved with the document. This means if you save a document with autosave off, the next time you open the document autosave will still be disabled. By default this is always switched on.

One reason you may choose to turn this off would be if you are working on an extremely large file where the autosave function may impact on your productivity. In cases like this, you may turn the feature off for a short period of time, then switch it back on later.

When you turn this off, any autosaves which are currently in progress are immediately cancelled. If you choose to switch this back on, AVA will schedule an autosave immediately for any unsaved changes.

Delete

Note: By switching Autosave off, your documents will no longer autosave and therefore you have the potential to lose any unsaved changes. We would strongly recommend that this is left on at all times.


Was this article helpful?


Knowledge Base Software powered by Helpjuice