Salvando o documento

Salvando arquivos no AVA


No menu Arquivo, você encontrará duas opções em relação ao processo de salvar um arquivo - Salvar e Salvar como. Salvar sobrescreverá o arquivo existente e Salvar como lhe dará a oportunidade de renomear o arquivo e fazer uma nova cópia dele, deixando a origem intacta.


Salvar

Isso atualizará o arquivo aberto no qual você está trabalhando com as alterações mais recentes feitas, substituindo a versão salva anteriormente. Ele também aplicará uma visualização QuickLook do design ao ícone do arquivo para facilitar seu reconhecimento no Finder.

Quando um novo desenho é aberto na tela, o nome do arquivo é Sem título. Na primeira vez que você salvar este design, uma planilha de salvamento aparecerá, permitindo que você escolha um nome, formato de arquivo e local desejado.

Lembre-se de salvar seu arquivo quando terminar de trabalhar nele naquele dia, acessando Menu Arquivo > Salvar ou usando ⌘S.

Nota : AVA salva automaticamente todas as alterações feitas no arquivo em segundo plano durante os períodos em que você não está trabalhando ativamente nele. Isso garante nenhuma perda de trabalho no caso infeliz de uma falha no computador ou corte de energia e seu arquivo será reaberto como foi visto pela última vez quando você reinicializar AVA .

A janela Salvar utiliza serviços de navegação, que permitem conectar-se a um servidor ou montar um disco enquanto a janela ainda está aberta, para que você não fique restrito a salvar apenas no disco rígido interno.

Ao reabrir um arquivo salvo no formato AVA , ele lembrará e restaurará uma série de configurações de visualização específicas, que estavam em vigor no momento em que o arquivo foi usado pela última vez. Alguns exemplos disso são camadas visíveis, avisos e cores visualizadas no momento de salvar.

Salvar como

Esta opção permite que você crie uma cópia de um arquivo no qual está trabalhando para fazer alterações no nome, formato ou localização.

  1. Vá para Menu Arquivo> Salvar como.
  2. Digite o nome do desenho e selecione a pasta ou disco de destino onde o desenho será salvo. Caracteres especiais de idiomas, como acentos, caracteres cirílicos ou japoneses, são tratados corretamente e mantêm as características corretas.
  3. Você pode salvar um design em qualquer um dos formatos listados. Os arquivos AVA devem ser salvos como ava4.

Nota : Os vários formatos de arquivo são explicados com mais detalhes em artigos separados. Basta pesquisar o formato de arquivo sobre o qual deseja ler, por exemplo, se você pesquisar em Tiff, encontrará o artigo sobre formatos de arquivo Tiff que descreve arquivos tiff e tiff grandes.

Salvar e Salvar como funcionam em segundo plano, permitindo que você continue com outro trabalho enquanto o salvamento do design está em andamento.

AVA adiciona automaticamente a extensão do arquivo ao salvar documentos. Por exemplo, se você estiver salvando um arquivo no formato Tiff, escolha o formato do arquivo na janela Salvar e a extensão .tif será anexada.

FAQ : Por que não consigo salvar no meu servidor?

Vá para Menu AVA > Configurações e selecione Formato de arquivo e, na guia Exportar, desmarque Criar ícone personalizado ao salvar.

Agora você deve conseguir salvar em seu servidor (não Apple).

Salvar cópia combinada como...

Save Combined Copy As: Exporting the Layout Window to view in other applications You can save a version of all the visible layers in your design or Layout Window,...

You can save a version of all the visible layers in your design or Layout Window, combined together into one image layer and saved in a format compatible with most third party softwares. The combined image is created using a profile and when saved, this profile accompanies the design so it will look similar when opened on other systems.


Saving the file

Follow the steps below to ensure your combined copy looks similar to the original artwork.

  1. Open the document and go to the window you wish to export from (Design or Layout Window).
  2. From the File Menu go to ‘Save Combined Copy As...’
  3. Select the format you want to save the file as and if you are saving from the Layout Window select the required resolution (saving from the design window will create a file the same resolution as the source document). Click Save.

Note: The output might appear slightly different to the AVA file but we expect it to be reasonably close to how it appeared in AVA. Files saved this way will appear wrong if reopened into AVA as the Viewing Conditions will be applied again.

The design will be exported in the number of repeats currently being viewed. Therefore if you need to send the file including the complete repeat area and drop, simply view the relevant number of repeats across and down with the correct drop setting before saving.

Specifying the profile to be used with Save Combined Copy As...

You do not need to specify a profile as AVA will automatically apply a generic profile. However, if you wish to choose the profile that will be applied when using Save Combined Copy As… select AVA Menu > Settings and select the File Format button. Click on the Export tab and press the Set button to locate the profile you wish to use.

Note: The resulting image is created in the colourspace of the profile, for example if you have an RGB profile set, AVA will create an RGB file.

Upon pressing Set, a Finder window opens allowing you to navigate to your preferred profile.

Note: The profile must contain a separation table and be in icc format. You can use profiles located at Hard drive > System > Library > ColorSync > Profiles if you wish. We recommend you select the Generic RGB 1998 profile to make an RGB image upon save, or the Generic CMYK profile to make a CMYK image. Click Open to set your selected profile as the profile to be embedded when using Save Combined Copy As… and your profile will be set in the Settings pane and applied to every file saved in this way.


Did you know... 

This function could be useful within a Palette

Saving combined copies has for a long time been an integral part of many workflows, allowing you to easily export designs and Layout Windows in popular formats including PDF and JPEG. Hereby, the viewing conditions of your system are embedded. This provides an improved visual match when opening the files into third party applications such as Preview.

In combination with the innovative Palette Technology, especially the looping functionalities, you can streamline workflows such as exporting all your colourways in different formats with the click of a single button.

You can find this Palette Handler in AVA Menu > Settings > Menus > File > Save. Drag it to your Palette, access the settings and tick Save Combined Copy.

To get inspired and find out more, contact our Technical Support Team.

The Movie


Salvamento automático

Autosave Autosave is a feature which automatically saves a dirty file (any file with unsav...

Autosave is a feature which automatically saves a dirty file (any file with unsaved changes) in the background when you are not working on it. Therefore, if you simply open a file and look at it, no autosave occurs. Similarly, as you are working on the file, no autosave occurs, but as soon as you stop working, the file is autosaved. 


This means that in the unfortunate event that your computer crashes or you suffer a power failure, you will not lose any work. When you re-launch AVA the file will re-open and will contain all the changes you had made to it.

You can choose to turn this feature on or off per document, and the state of the function (on or off) is saved with the document. This means if you save a document with autosave off, the next time you open the document autosave will still be disabled. By default this is always switched on.

One reason you may choose to turn this off would be if you are working on an extremely large file where the autosave function may impact on your productivity. In cases like this, you may turn the feature off for a short period of time, then switch it back on later.

When you turn this off, any autosaves which are currently in progress are immediately cancelled. If you choose to switch this back on, AVA will schedule an autosave immediately for any unsaved changes.

Delete

Note: By switching Autosave off, your documents will no longer autosave and therefore you have the potential to lose any unsaved changes. We would strongly recommend that this is left on at all times.


Was this article helpful?


Knowledge Base Software powered by Helpjuice