Salvataggio del documento

Salvataggio di file in AVA


Nel menu File troverai due opzioni relative al processo di salvataggio di un file: Salva e Salva con nome. Salva sovrascriverà il file esistente e Salva con nome ti darà l'opportunità di rinominare il file e crearne una nuova copia, lasciando intatta l'origine.


Salva

Questo aggiornerà il file aperto su cui stai lavorando con le ultime modifiche apportate, sovrascrivendo la versione salvata in precedenza. Applicherà inoltre un'anteprima QuickLook del disegno all'icona del file per facilitarne il riconoscimento nel Finder.

Quando un nuovo disegno viene aperto sullo schermo, il nome del file è Senza titolo. La prima volta che salvi questo disegno, verrà visualizzato un foglio di salvataggio che ti consentirà di scegliere un nome, un formato file e una posizione desiderata.

Ricordati di salvare il file quando hai finito di lavorarci per la giornata andando su Menu File > Salva o utilizzando ⌘S.

Nota : AVA salva automaticamente tutte le modifiche apportate al file in background durante i periodi in cui non ci stai lavorando attivamente. Ciò garantisce l'assenza di perdita di lavoro nello sfortunato caso di un crash del computer o di un'interruzione di corrente e il tuo file si riaprirà come era stato visto l'ultima volta quando riavvii AVA .

La finestra di salvataggio utilizza i servizi di navigazione, che ti consentono di connetterti a un server o montare un disco mentre la finestra è ancora aperta, quindi non sei limitato a salvare solo sul disco rigido interno.

Quando si riapre un file salvato nel formato AVA , ricorderà e ripristinerà una serie di impostazioni di visualizzazione specifiche, che erano in vigore al momento dell'ultimo utilizzo del file. Alcuni esempi di ciò sono i livelli visibili, gli avvisi e le varianti colore visualizzate al momento del salvataggio.

Salva come

Questa opzione ti consente di creare una copia di un file su cui stai attualmente lavorando per apportare una modifica al nome, al formato o alla posizione.

  1. Vai al menu File > Salva con nome.
  2. Digita il nome del disegno e seleziona la cartella o il disco di destinazione in cui salvare il disegno. I caratteri delle lingue speciali come accenti, caratteri cirillici o giapponesi vengono gestiti correttamente e mantengono le caratteristiche corrette.
  3. È possibile salvare un disegno in uno qualsiasi dei formati elencati. I file AVA devono essere salvati come ava4.

Nota : i vari formati di file sono spiegati più dettagliatamente in articoli separati. Cerca semplicemente il formato di file di cui desideri leggere, ad esempio se cerchi su Tiff, troverai l'articolo sui formati di file Tiff che descrive tiff e i file tiff di grandi dimensioni.

Salva e Salva con nome lavorano in background consentendoti di continuare con altro lavoro mentre è in corso il salvataggio del progetto.

AVA aggiunge automaticamente l'estensione del file quando si salvano i documenti. Ad esempio, se stai salvando un file in formato Tiff, scegli il formato file nella finestra Salva e verrà aggiunta l'estensione .tif.

FAQ : Perché non riesco a salvare sul mio server?

Vai al menu AVA > Impostazioni e seleziona Formato file e, nella scheda Esporta, deseleziona Crea icona personalizzata al salvataggio.

Ora dovresti essere in grado di salvare sul tuo server (non Apple).

Salva copia combinata con nome...

Save Combined Copy As: Exporting the Layout Window to view in other applications You can save a version of all the visible layers in your design or Layout Window,...

You can save a version of all the visible layers in your design or Layout Window, combined together into one image layer and saved in a format compatible with most third party softwares. The combined image is created using a profile and when saved, this profile accompanies the design so it will look similar when opened on other systems.


Saving the file

Follow the steps below to ensure your combined copy looks similar to the original artwork.

  1. Open the document and go to the window you wish to export from (Design or Layout Window).
  2. From the File Menu go to ‘Save Combined Copy As...’
  3. Select the format you want to save the file as and if you are saving from the Layout Window select the required resolution (saving from the design window will create a file the same resolution as the source document). Click Save.

Note: The output might appear slightly different to the AVA file but we expect it to be reasonably close to how it appeared in AVA. Files saved this way will appear wrong if reopened into AVA as the Viewing Conditions will be applied again.

The design will be exported in the number of repeats currently being viewed. Therefore if you need to send the file including the complete repeat area and drop, simply view the relevant number of repeats across and down with the correct drop setting before saving.

Specifying the profile to be used with Save Combined Copy As...

You do not need to specify a profile as AVA will automatically apply a generic profile. However, if you wish to choose the profile that will be applied when using Save Combined Copy As… select AVA Menu > Settings and select the File Format button. Click on the Export tab and press the Set button to locate the profile you wish to use.

Note: The resulting image is created in the colourspace of the profile, for example if you have an RGB profile set, AVA will create an RGB file.

Upon pressing Set, a Finder window opens allowing you to navigate to your preferred profile.

Note: The profile must contain a separation table and be in icc format. You can use profiles located at Hard drive > System > Library > ColorSync > Profiles if you wish. We recommend you select the Generic RGB 1998 profile to make an RGB image upon save, or the Generic CMYK profile to make a CMYK image. Click Open to set your selected profile as the profile to be embedded when using Save Combined Copy As… and your profile will be set in the Settings pane and applied to every file saved in this way.


Did you know... 

This function could be useful within a Palette

Saving combined copies has for a long time been an integral part of many workflows, allowing you to easily export designs and Layout Windows in popular formats including PDF and JPEG. Hereby, the viewing conditions of your system are embedded. This provides an improved visual match when opening the files into third party applications such as Preview.

In combination with the innovative Palette Technology, especially the looping functionalities, you can streamline workflows such as exporting all your colourways in different formats with the click of a single button.

You can find this Palette Handler in AVA Menu > Settings > Menus > File > Save. Drag it to your Palette, access the settings and tick Save Combined Copy.

To get inspired and find out more, contact our Technical Support Team.

The Movie


Salvataggio automatico

Autosave Autosave is a feature which automatically saves a dirty file (any file with unsav...

Autosave is a feature which automatically saves a dirty file (any file with unsaved changes) in the background when you are not working on it. Therefore, if you simply open a file and look at it, no autosave occurs. Similarly, as you are working on the file, no autosave occurs, but as soon as you stop working, the file is autosaved. 


This means that in the unfortunate event that your computer crashes or you suffer a power failure, you will not lose any work. When you re-launch AVA the file will re-open and will contain all the changes you had made to it.

You can choose to turn this feature on or off per document, and the state of the function (on or off) is saved with the document. This means if you save a document with autosave off, the next time you open the document autosave will still be disabled. By default this is always switched on.

One reason you may choose to turn this off would be if you are working on an extremely large file where the autosave function may impact on your productivity. In cases like this, you may turn the feature off for a short period of time, then switch it back on later.

When you turn this off, any autosaves which are currently in progress are immediately cancelled. If you choose to switch this back on, AVA will schedule an autosave immediately for any unsaved changes.

Delete

Note: By switching Autosave off, your documents will no longer autosave and therefore you have the potential to lose any unsaved changes. We would strongly recommend that this is left on at all times.


Was this article helpful?


Knowledge Base Software powered by Helpjuice