Enregistrer le document

Enregistrer des fichiers dans AVA


Dans votre menu Fichier, vous trouverez deux options concernant le processus d'enregistrement d'un fichier : Enregistrer et Enregistrer sous. Enregistrer écrasera le fichier existant et Enregistrer sous vous donnera la possibilité de renommer le fichier et d'en faire une nouvelle copie, en laissant l'origine intacte.


Sauvegarder

Cela mettra à jour le fichier ouvert sur lequel vous travaillez avec les dernières modifications que vous avez apportées, écrasant ainsi la version précédemment enregistrée. Il appliquera également un aperçu QuickLook de la conception à l'icône du fichier pour faciliter sa reconnaissance dans le Finder.

Lorsqu'un nouveau dessin est ouvert à l'écran, le nom du fichier est Sans titre. La première fois que vous enregistrez ce design, une feuille de sauvegarde apparaîtra, vous permettant de choisir un nom, un format de fichier et l'emplacement souhaité.

N'oubliez pas de sauvegarder votre fichier lorsque vous avez fini de travailler dessus pour la journée en allant dans Menu Fichier > Enregistrer ou en utilisant ⌘S.

Remarque : AVA enregistre automatiquement toutes les modifications que vous apportez au fichier en arrière-plan pendant les périodes où vous ne travaillez pas activement dessus. Cela garantit aucune perte de travail dans le cas malheureux d'une panne d'ordinateur ou d'une coupure de courant et votre fichier rouvrira tel qu'il a été vu pour la dernière fois lorsque vous relancerez AVA .

La fenêtre de sauvegarde utilise des services de navigation, qui vous permettent de vous connecter à un serveur ou de monter un disque pendant que la fenêtre est encore ouverte, vous n'êtes donc pas limité à la sauvegarde uniquement sur le disque dur interne.

Lors de la réouverture d'un fichier enregistré au format AVA , il mémorisera et restaurera une multitude de paramètres d'affichage spécifiques, qui étaient en place au moment de la dernière utilisation du fichier. Quelques exemples en sont les calques visibles, les avertissements et les coloris visualisés au moment de l'enregistrement.

Enregistrer sous

Cette option vous permet de créer une copie d'un fichier sur lequel vous travaillez actuellement afin d'apporter une modification au nom, au format ou à l'emplacement.

  1. Allez dans le menu Fichier > Enregistrer sous.
  2. Tapez le nom du design et sélectionnez le dossier ou le disque de destination sur lequel le design doit être enregistré. Les caractères spéciaux du langage tels que les accents, les caractères cyrilliques ou japonais sont traités correctement et conservent leurs caractéristiques correctes.
  3. Vous pouvez enregistrer une conception dans l’un des formats répertoriés. Les fichiers AVA doivent être enregistrés sous ava4.

Remarque : Les différents formats de fichiers sont expliqués plus en détail dans des articles séparés. Recherchez simplement le format de fichier sur lequel vous souhaitez en savoir plus, par exemple si vous effectuez une recherche sur Tiff, vous trouverez l'article sur les formats de fichiers Tiff qui décrit les fichiers tiff et les gros fichiers tiff.

Enregistrer et Enregistrer sous fonctionnent en arrière-plan, vous permettant de poursuivre d'autres travaux pendant que l'enregistrement de la conception est en cours.

AVA ajoute automatiquement l'extension de fichier lors de l'enregistrement des documents. Par exemple, si vous enregistrez un fichier au format Tiff, choisissez le format de fichier dans la fenêtre Enregistrer et l'extension .tif est ajoutée.

FAQ : Pourquoi ne puis-je pas enregistrer sur mon serveur ?

Accédez au menu AVA > Paramètres et sélectionnez Format de fichier, puis dans l'onglet Exporter, décochez Créer une icône personnalisée lors de l'enregistrement.

Vous devriez maintenant pouvoir enregistrer sur votre serveur (non Apple).

Enregistrer la copie combinée sous...

Save Combined Copy As: Exporting the Layout Window to view in other applications You can save a version of all the visible layers in your design or Layout Window,...

You can save a version of all the visible layers in your design or Layout Window, combined together into one image layer and saved in a format compatible with most third party softwares. The combined image is created using a profile and when saved, this profile accompanies the design so it will look similar when opened on other systems.


Saving the file

Follow the steps below to ensure your combined copy looks similar to the original artwork.

  1. Open the document and go to the window you wish to export from (Design or Layout Window).
  2. From the File Menu go to ‘Save Combined Copy As...’
  3. Select the format you want to save the file as and if you are saving from the Layout Window select the required resolution (saving from the design window will create a file the same resolution as the source document). Click Save.

Note: The output might appear slightly different to the AVA file but we expect it to be reasonably close to how it appeared in AVA. Files saved this way will appear wrong if reopened into AVA as the Viewing Conditions will be applied again.

The design will be exported in the number of repeats currently being viewed. Therefore if you need to send the file including the complete repeat area and drop, simply view the relevant number of repeats across and down with the correct drop setting before saving.

Specifying the profile to be used with Save Combined Copy As...

You do not need to specify a profile as AVA will automatically apply a generic profile. However, if you wish to choose the profile that will be applied when using Save Combined Copy As… select AVA Menu > Settings and select the File Format button. Click on the Export tab and press the Set button to locate the profile you wish to use.

Note: The resulting image is created in the colourspace of the profile, for example if you have an RGB profile set, AVA will create an RGB file.

Upon pressing Set, a Finder window opens allowing you to navigate to your preferred profile.

Note: The profile must contain a separation table and be in icc format. You can use profiles located at Hard drive > System > Library > ColorSync > Profiles if you wish. We recommend you select the Generic RGB 1998 profile to make an RGB image upon save, or the Generic CMYK profile to make a CMYK image. Click Open to set your selected profile as the profile to be embedded when using Save Combined Copy As… and your profile will be set in the Settings pane and applied to every file saved in this way.


Did you know... 

This function could be useful within a Palette

Saving combined copies has for a long time been an integral part of many workflows, allowing you to easily export designs and Layout Windows in popular formats including PDF and JPEG. Hereby, the viewing conditions of your system are embedded. This provides an improved visual match when opening the files into third party applications such as Preview.

In combination with the innovative Palette Technology, especially the looping functionalities, you can streamline workflows such as exporting all your colourways in different formats with the click of a single button.

You can find this Palette Handler in AVA Menu > Settings > Menus > File > Save. Drag it to your Palette, access the settings and tick Save Combined Copy.

To get inspired and find out more, contact our Technical Support Team.

The Movie


Sauvegarde automatique

Autosave Autosave is a feature which automatically saves a dirty file (any file with unsav...

Autosave is a feature which automatically saves a dirty file (any file with unsaved changes) in the background when you are not working on it. Therefore, if you simply open a file and look at it, no autosave occurs. Similarly, as you are working on the file, no autosave occurs, but as soon as you stop working, the file is autosaved. 


This means that in the unfortunate event that your computer crashes or you suffer a power failure, you will not lose any work. When you re-launch AVA the file will re-open and will contain all the changes you had made to it.

You can choose to turn this feature on or off per document, and the state of the function (on or off) is saved with the document. This means if you save a document with autosave off, the next time you open the document autosave will still be disabled. By default this is always switched on.

One reason you may choose to turn this off would be if you are working on an extremely large file where the autosave function may impact on your productivity. In cases like this, you may turn the feature off for a short period of time, then switch it back on later.

When you turn this off, any autosaves which are currently in progress are immediately cancelled. If you choose to switch this back on, AVA will schedule an autosave immediately for any unsaved changes.

Delete

Note: By switching Autosave off, your documents will no longer autosave and therefore you have the potential to lose any unsaved changes. We would strongly recommend that this is left on at all times.


Was this article helpful?


Knowledge Base Software powered by Helpjuice