Speichern des Dokuments

Dateien in AVA speichern


In Ihrem Dateimenü finden Sie zwei Optionen zum Speichern einer Datei: Speichern und Speichern unter. „Speichern“ überschreibt die vorhandene Datei und „Speichern unter“ gibt Ihnen die Möglichkeit, die Datei umzubenennen und eine neue Kopie davon zu erstellen, wobei der Ursprung erhalten bleibt.


Speichern

Dadurch wird die geöffnete Datei, an der Sie arbeiten, mit den letzten von Ihnen vorgenommenen Änderungen aktualisiert und die zuvor gespeicherte Version überschrieben. Außerdem wird eine QuickLook-Vorschau des Designs auf das Dateisymbol angewendet, damit es im Finder leichter erkennbar ist.

Wenn ein neues Design auf dem Bildschirm geöffnet wird, lautet der Dateiname „Ohne Titel“. Wenn Sie dieses Design zum ersten Mal speichern, wird ein Speicherblatt angezeigt, in dem Sie einen Namen, ein Dateiformat und einen gewünschten Speicherort auswählen können.

Denken Sie daran, Ihre Datei zu speichern, wenn Sie mit der Arbeit an diesem Tag fertig sind, indem Sie auf „Dateimenü“ > „Speichern“ gehen oder ⌘S verwenden.

Hinweis : AVA speichert automatisch alle Änderungen, die Sie an der Datei im Hintergrund vornehmen, während Sie nicht aktiv daran arbeiten. Dies garantiert, dass im unglücklichen Fall eines Computerabsturzes oder eines Stromausfalls keine Arbeit verloren geht und Ihre Datei so wieder geöffnet wird, wie sie zuletzt beim Neustart AVA angezeigt wurde.

Das Speicherfenster nutzt Navigationsdienste, die es Ihnen ermöglichen, eine Verbindung zu einem Server herzustellen oder eine Festplatte bereitzustellen, während das Fenster noch geöffnet ist, sodass Sie nicht darauf beschränkt sind, nur auf der internen Festplatte zu speichern.

Beim erneuten Öffnen einer im AVA Format gespeicherten Datei werden zahlreiche spezifische Ansichtseinstellungen gespeichert und wiederhergestellt, die zum Zeitpunkt der letzten Verwendung der Datei vorhanden waren. Beispiele hierfür sind sichtbare Ebenen, Warnungen und angezeigte Farbkombinationen zum Zeitpunkt des Speicherns.

Speichern als

Mit dieser Option können Sie eine Kopie einer Datei erstellen, an der Sie gerade arbeiten, um Namen, Format oder Speicherort zu ändern.

  1. Gehen Sie zum Menü „Datei“ > „Speichern unter“.
  2. Geben Sie den Namen des Designs ein und wählen Sie den Zielordner oder die Zielfestplatte aus, in dem das Design gespeichert werden soll. Sonderzeichen der Sprache wie Akzente, kyrillische oder japanische Zeichen werden korrekt behandelt und behalten die richtigen Eigenschaften.
  3. Sie können ein Design in jedem der aufgeführten Formate speichern. AVA Dateien sollten als ava4 gespeichert werden.

Hinweis : Die verschiedenen Dateiformate werden in separaten Artikeln näher erläutert. Suchen Sie einfach nach dem Dateiformat, über das Sie mehr erfahren möchten. Wenn Sie beispielsweise nach TIFF suchen, finden Sie den Artikel zu TIFF-Dateiformaten, der TIFF und große TIFF-Dateien beschreibt.

Die Funktionen „Speichern“ und „Speichern unter“ laufen im Hintergrund ab, sodass Sie mit anderen Arbeiten fortfahren können, während das Design gespeichert wird.

AVA fügt beim Speichern von Dokumenten automatisch die Dateierweiterung hinzu. Wenn Sie beispielsweise eine Datei im TIFF-Format speichern, wählen Sie im Fenster „Speichern“ das Dateiformat aus und die Erweiterung .tif wird angehängt.

FAQ : Warum kann ich nicht auf meinem Server speichern?

Gehen Sie zu AVA Menü“ > „Einstellungen“, wählen Sie „Dateiformat“ und deaktivieren Sie auf der Registerkarte „Exportieren“ das Kontrollkästchen „Beim Speichern benutzerdefiniertes Symbol erstellen“.

Sie sollten nun in der Lage sein, auf Ihrem Server (nicht von Apple) zu speichern.

Kombinierte Kopie speichern unter...

Save Combined Copy As: Exporting the Layout Window to view in other applications You can save a version of all the visible layers in your design or Layout Window,...

You can save a version of all the visible layers in your design or Layout Window, combined together into one image layer and saved in a format compatible with most third party softwares. The combined image is created using a profile and when saved, this profile accompanies the design so it will look similar when opened on other systems.


Saving the file

Follow the steps below to ensure your combined copy looks similar to the original artwork.

  1. Open the document and go to the window you wish to export from (Design or Layout Window).
  2. From the File Menu go to ‘Save Combined Copy As...’
  3. Select the format you want to save the file as and if you are saving from the Layout Window select the required resolution (saving from the design window will create a file the same resolution as the source document). Click Save.

Note: The output might appear slightly different to the AVA file but we expect it to be reasonably close to how it appeared in AVA. Files saved this way will appear wrong if reopened into AVA as the Viewing Conditions will be applied again.

The design will be exported in the number of repeats currently being viewed. Therefore if you need to send the file including the complete repeat area and drop, simply view the relevant number of repeats across and down with the correct drop setting before saving.

Specifying the profile to be used with Save Combined Copy As...

You do not need to specify a profile as AVA will automatically apply a generic profile. However, if you wish to choose the profile that will be applied when using Save Combined Copy As… select AVA Menu > Settings and select the File Format button. Click on the Export tab and press the Set button to locate the profile you wish to use.

Note: The resulting image is created in the colourspace of the profile, for example if you have an RGB profile set, AVA will create an RGB file.

Upon pressing Set, a Finder window opens allowing you to navigate to your preferred profile.

Note: The profile must contain a separation table and be in icc format. You can use profiles located at Hard drive > System > Library > ColorSync > Profiles if you wish. We recommend you select the Generic RGB 1998 profile to make an RGB image upon save, or the Generic CMYK profile to make a CMYK image. Click Open to set your selected profile as the profile to be embedded when using Save Combined Copy As… and your profile will be set in the Settings pane and applied to every file saved in this way.


Did you know... 

This function could be useful within a Palette

Saving combined copies has for a long time been an integral part of many workflows, allowing you to easily export designs and Layout Windows in popular formats including PDF and JPEG. Hereby, the viewing conditions of your system are embedded. This provides an improved visual match when opening the files into third party applications such as Preview.

In combination with the innovative Palette Technology, especially the looping functionalities, you can streamline workflows such as exporting all your colourways in different formats with the click of a single button.

You can find this Palette Handler in AVA Menu > Settings > Menus > File > Save. Drag it to your Palette, access the settings and tick Save Combined Copy.

To get inspired and find out more, contact our Technical Support Team.

The Movie


Automatisch speichern

Autosave Autosave is a feature which automatically saves a dirty file (any file with unsav...

Autosave is a feature which automatically saves a dirty file (any file with unsaved changes) in the background when you are not working on it. Therefore, if you simply open a file and look at it, no autosave occurs. Similarly, as you are working on the file, no autosave occurs, but as soon as you stop working, the file is autosaved. 


This means that in the unfortunate event that your computer crashes or you suffer a power failure, you will not lose any work. When you re-launch AVA the file will re-open and will contain all the changes you had made to it.

You can choose to turn this feature on or off per document, and the state of the function (on or off) is saved with the document. This means if you save a document with autosave off, the next time you open the document autosave will still be disabled. By default this is always switched on.

One reason you may choose to turn this off would be if you are working on an extremely large file where the autosave function may impact on your productivity. In cases like this, you may turn the feature off for a short period of time, then switch it back on later.

When you turn this off, any autosaves which are currently in progress are immediately cancelled. If you choose to switch this back on, AVA will schedule an autosave immediately for any unsaved changes.

Delete

Note: By switching Autosave off, your documents will no longer autosave and therefore you have the potential to lose any unsaved changes. We would strongly recommend that this is left on at all times.


Was this article helpful?


Knowledge Base Software powered by Helpjuice