ファイル メニューには、ファイルの保存プロセスに関する 2 つのオプション、[保存] と [名前を付けて保存] があります。 「保存」を選択すると既存のファイルが上書きされ、「名前を付けて保存」を選択すると、ファイルの名前を変更して、元のファイルをそのままにして新しいコピーを作成できます。
保存
これにより、作業中の開いているファイルが最新の変更内容で更新され、以前に保存したバージョンが上書きされます。また、デザインの QuickLook プレビューをファイル アイコンに適用して、Finder で認識しやすくします。
新しいデザインを画面上で開くと、ファイル名は「無題」になります。このデザインを初めて保存するときは、保存シートが表示され、名前、ファイル形式、および目的の場所を選択できます。
その日の作業が終了したら、[ファイル] メニュー > [保存] に移動するか、⌘S を使用してファイルを保存してください。
保存ウィンドウはナビゲーション サービスを使用しており、ウィンドウを開いたままサーバーに接続したり、ディスクをマウントしたりできるため、内蔵ハード ドライブへの保存のみに制限されません。
AVA形式で保存されたファイルを再度開くと、ファイルが最後に使用された時点で設定されていた特定の表示設定のホストが記憶され、復元されます。この例としては、保存時に表示されるレイヤー、警告、表示されるカラーなどが挙げられます。
名前を付けて保存
このオプションを使用すると、名前、形式、または場所を変更するために、現在作業中のファイルのコピーを作成できます。
- [ファイル]メニュー > [名前を付けて保存]に移動します。
- デザインの名前を入力し、デザインの保存先フォルダーまたはディスクを選択します。アクセント、キリル文字、日本語文字などの特殊言語文字は正しく処理され、正しい特性が保持されます。
- リストされた形式のいずれかでデザインを保存できます。 AVAファイルは ava4 として保存する必要があります。
「保存」と「名前を付けて保存」はバックグラウンドで動作するため、デザインの保存の進行中に他の作業を続けることができます。
AVAドキュメントを保存するときにファイル拡張子を自動的に追加します。たとえば、ファイルを Tiff 形式で保存する場合、[保存] ウィンドウでファイル形式を選択すると、拡張子 .tif が追加されます。
結合したコピーを名前を付けて保存...
You can save a version of all the visible layers in your design or Layout Window, combined together into one image layer and saved in a format compatible with most third party softwares. The combined image is created using a profile and when saved, this profile accompanies the design so it will look similar when opened on other systems.
Saving the file
Follow the steps below to ensure your combined copy looks similar to the original artwork.
- Open the document and go to the window you wish to export from (Design or Layout Window).
- From the File Menu go to ‘Save Combined Copy As...’
- Select the format you want to save the file as and if you are saving from the Layout Window select the required resolution (saving from the design window will create a file the same resolution as the source document). Click Save.
The design will be exported in the number of repeats currently being viewed. Therefore if you need to send the file including the complete repeat area and drop, simply view the relevant number of repeats across and down with the correct drop setting before saving.
Specifying the profile to be used with Save Combined Copy As...
You do not need to specify a profile as AVA will automatically apply a generic profile. However, if you wish to choose the profile that will be applied when using Save Combined Copy As… select AVA Menu > Settings and select the File Format button. Click on the Export tab and press the Set button to locate the profile you wish to use.
Upon pressing Set, a Finder window opens allowing you to navigate to your preferred profile.
The Movie
自動保存
Autosave is a feature which automatically saves a dirty file (any file with unsaved changes) in the background when you are not working on it. Therefore, if you simply open a file and look at it, no autosave occurs. Similarly, as you are working on the file, no autosave occurs, but as soon as you stop working, the file is autosaved.
This means that in the unfortunate event that your computer crashes or you suffer a power failure, you will not lose any work. When you re-launch AVA the file will re-open and will contain all the changes you had made to it.
You can choose to turn this feature on or off per document, and the state of the function (on or off) is saved with the document. This means if you save a document with autosave off, the next time you open the document autosave will still be disabled. By default this is always switched on.
One reason you may choose to turn this off would be if you are working on an extremely large file where the autosave function may impact on your productivity. In cases like this, you may turn the feature off for a short period of time, then switch it back on later.
When you turn this off, any autosaves which are currently in progress are immediately cancelled. If you choose to switch this back on, AVA will schedule an autosave immediately for any unsaved changes.