Guardando el documento

Guardar archivos en AVA


En su Menú Archivo, encontrará dos opciones con respecto al proceso de guardar un archivo: Guardar y Guardar como. Guardar escribirá sobre el archivo existente y Guardar como le dará la oportunidad de cambiar el nombre del archivo y hacer una nueva copia, dejando el origen intacto.


Ahorrar

Esto actualizará el archivo abierto en el que está trabajando con los últimos cambios que haya realizado, sobrescribiendo la versión guardada anteriormente. También aplicará una Vista previa rápida del diseño al ícono del archivo para que sea más fácil reconocerlo en el Finder.

Cuando se abre un nuevo diseño en la pantalla, el nombre del archivo es Sin título. La primera vez que guarde este diseño, aparecerá una hoja para guardar que le permitirá elegir un nombre, formato de archivo y ubicación deseada.

Recuerde guardar su archivo cuando haya terminado de trabajar en él durante el día yendo a Menú Archivo > Guardar o usando ⌘S.

Nota : AVA guarda automáticamente cualquier cambio que realice en el archivo en segundo plano durante los períodos en los que no está trabajando activamente en él. Esto garantiza que no se perderá el trabajo en el desafortunado caso de una falla de la computadora o un corte de energía y su archivo se volverá a abrir como se vio por última vez cuando reinicia AVA .

La ventana Guardar utiliza servicios de navegación, que le permiten conectarse a un servidor o montar un disco mientras la ventana aún está abierta, por lo que no está restringido a guardar únicamente en el disco duro interno.

Al volver a abrir un archivo guardado en formato AVA , recordará y restaurará una serie de configuraciones de vista específicas, que estaban vigentes en el momento en que se utilizó el archivo por última vez. Algunos ejemplos de esto son capas visibles, advertencias y combinaciones de colores vistas en el momento de guardar.

Guardar como

Esta opción le permite crear una copia de un archivo en el que está trabajando actualmente para realizar un cambio de nombre, formato o ubicación.

  1. Vaya al menú Archivo > Guardar como.
  2. Escriba el nombre del diseño y seleccione la carpeta o disco de destino en el que se guardará el diseño. Los caracteres especiales del idioma, como acentos, caracteres cirílicos o japoneses, se manejan correctamente y conservan las características correctas.
  3. Puede guardar un diseño en cualquiera de los formatos enumerados. Los archivos AVA deben guardarse como ava4.

Nota : Los distintos formatos de archivo se explican con más detalle en artículos separados. Simplemente busque el formato de archivo sobre el que desea leer; por ejemplo, si busca en Tiff, encontrará el artículo sobre formatos de archivos Tiff que describe los archivos tiff y tiff grandes.

Guardar y Guardar como funcionan en segundo plano, lo que le permite continuar con otros trabajos mientras se guarda el diseño.

AVA agrega automáticamente la extensión del archivo al guardar documentos. Por ejemplo, si está guardando un archivo en formato Tiff, elija el formato de archivo en la ventana Guardar y se agrega la extensión .tif.

Preguntas frecuentes : ¿Por qué no puedo guardar en mi servidor?

Vaya a Menú AVA > Configuración y seleccione Formato de archivo, y en la pestaña Exportar, desmarque Crear icono personalizado al guardar.

Ahora debería poder guardar en su servidor (que no sea Apple).

Guardar copia combinada como...

Save Combined Copy As: Exporting the Layout Window to view in other applications You can save a version of all the visible layers in your design or Layout Window,...

You can save a version of all the visible layers in your design or Layout Window, combined together into one image layer and saved in a format compatible with most third party softwares. The combined image is created using a profile and when saved, this profile accompanies the design so it will look similar when opened on other systems.


Saving the file

Follow the steps below to ensure your combined copy looks similar to the original artwork.

  1. Open the document and go to the window you wish to export from (Design or Layout Window).
  2. From the File Menu go to ‘Save Combined Copy As...’
  3. Select the format you want to save the file as and if you are saving from the Layout Window select the required resolution (saving from the design window will create a file the same resolution as the source document). Click Save.

Note: The output might appear slightly different to the AVA file but we expect it to be reasonably close to how it appeared in AVA. Files saved this way will appear wrong if reopened into AVA as the Viewing Conditions will be applied again.

The design will be exported in the number of repeats currently being viewed. Therefore if you need to send the file including the complete repeat area and drop, simply view the relevant number of repeats across and down with the correct drop setting before saving.

Specifying the profile to be used with Save Combined Copy As...

You do not need to specify a profile as AVA will automatically apply a generic profile. However, if you wish to choose the profile that will be applied when using Save Combined Copy As… select AVA Menu > Settings and select the File Format button. Click on the Export tab and press the Set button to locate the profile you wish to use.

Note: The resulting image is created in the colourspace of the profile, for example if you have an RGB profile set, AVA will create an RGB file.

Upon pressing Set, a Finder window opens allowing you to navigate to your preferred profile.

Note: The profile must contain a separation table and be in icc format. You can use profiles located at Hard drive > System > Library > ColorSync > Profiles if you wish. We recommend you select the Generic RGB 1998 profile to make an RGB image upon save, or the Generic CMYK profile to make a CMYK image. Click Open to set your selected profile as the profile to be embedded when using Save Combined Copy As… and your profile will be set in the Settings pane and applied to every file saved in this way.


Did you know... 

This function could be useful within a Palette

Saving combined copies has for a long time been an integral part of many workflows, allowing you to easily export designs and Layout Windows in popular formats including PDF and JPEG. Hereby, the viewing conditions of your system are embedded. This provides an improved visual match when opening the files into third party applications such as Preview.

In combination with the innovative Palette Technology, especially the looping functionalities, you can streamline workflows such as exporting all your colourways in different formats with the click of a single button.

You can find this Palette Handler in AVA Menu > Settings > Menus > File > Save. Drag it to your Palette, access the settings and tick Save Combined Copy.

To get inspired and find out more, contact our Technical Support Team.

The Movie


Autoguardado

Autosave Autosave is a feature which automatically saves a dirty file (any file with unsav...

Autosave is a feature which automatically saves a dirty file (any file with unsaved changes) in the background when you are not working on it. Therefore, if you simply open a file and look at it, no autosave occurs. Similarly, as you are working on the file, no autosave occurs, but as soon as you stop working, the file is autosaved. 


This means that in the unfortunate event that your computer crashes or you suffer a power failure, you will not lose any work. When you re-launch AVA the file will re-open and will contain all the changes you had made to it.

You can choose to turn this feature on or off per document, and the state of the function (on or off) is saved with the document. This means if you save a document with autosave off, the next time you open the document autosave will still be disabled. By default this is always switched on.

One reason you may choose to turn this off would be if you are working on an extremely large file where the autosave function may impact on your productivity. In cases like this, you may turn the feature off for a short period of time, then switch it back on later.

When you turn this off, any autosaves which are currently in progress are immediately cancelled. If you choose to switch this back on, AVA will schedule an autosave immediately for any unsaved changes.

Delete

Note: By switching Autosave off, your documents will no longer autosave and therefore you have the potential to lose any unsaved changes. We would strongly recommend that this is left on at all times.


Was this article helpful?


Knowledge Base Software powered by Helpjuice