Arquivos de cores multivisualização: crie um arquivo de cores a partir da gama de cores da sua impressora

Como usar cores que você sabe que sua impressora pode alcançar


Você pode criar arquivos de cores com base nos perfis do seu monitor ou impressora e especificar o número de páginas incluídas, o layout que o arquivo de cores adota e os níveis de luminosidade necessários. Esses arquivos de cores são extremamente úteis porque fornecem um arquivo de cores que contém apenas as cores que sua impressora pode obter.


Isso evita que você use cores que não podem ser obtidas na sua impressora e contribui para obter uma correspondência de tela para impressão*

  1. No ColourSys , vá para Menu Arquivo > Novo Multiview Colorfile… A seguinte janela será aberta:
  2. Escolha entre os modelos tradicionais CIE La*b* e os mais recentes (2008) CIE CAM02 Color Space. Uma ligeira diferença na mudança de matiz ocorrerá entre cada modelo ao gerar o arquivo de cores.

    Como regra geral, CIE CAM02 gera uma mistura muito mais suave entre cores, onde CIE La*b* tende a ter mudanças de cor à medida que as cores ficam mais fortes (como azul para roxo).

  3. Escolha entre três opções diferentes de layout de arquivo colorido. Cada visualização é descrita mais adiante neste artigo.
  4. Escolha qual gama de cores usar no Multiview Colourfile.
    • Filtrar gama - opte por gerar cores a partir da gama do monitor, da gama da impressora ou de um perfil ICC selecionado, como um da sua produção. As cores geradas refletirão diretamente quaisquer limites de gama selecionados usando o modelo de layout escolhido

  5. Selecione sua tolerância dE.

    • dE - use a barra deslizante para determinar sua tolerância Delta E. Quanto menor a tolerância, menos chips aparecerão no arquivo de cores, mas serão mais precisos. Quanto maior a tolerância, mais chips você verá no arquivo de cores resultante, mas eles podem ser menos precisos

  6. Personalize a mistura e a divisão dos chips de cores gerados usando páginas, linhas e colunas:
    • Páginas - refletirá quantas páginas serão geradas nas linhas e colunas especificadas. Por exemplo, se você tiver apenas 8 linhas e 8 colunas, não deverá espalhar as cores por 20 páginas, pois isso deixaria apenas algumas cores por página. As páginas também refletem determinados atributos dependendo do layout selecionado.
    • Linhas - determina as etapas de mesclagem e o número de chips horizontais. Números menores criarão menos etapas de mistura entre chips
    • Colunas - determina as etapas de mistura e o número de chips verticais. Números menores criarão menos etapas de mistura entre chips

  7. Controle a faixa de escuro a claro em um determinado matiz do arquivo de cores para enfatizar a saturação:
    • Min Lightness - limita a parte inferior da escala de luminosidade com 0 sendo branco
    • Max Lightness - limita o topo da escala de luminosidade com 100 sendo preto
    • Max Chroma - números baixos dessaturarão a tonalidade do arquivo de cores, empurrando os tons para tons pastéis. O valor 100 representa a saturação máxima em toda a gama

  8. Clique em OK para gerar o arquivo de cores usando as configurações selecionadas e, em seguida, role pelas páginas usando o navegador de páginas normal, na parte superior do arquivo de cores.
  9. Adicione um prefixo aos nomes dos chips coloridos.

Com o arquivo colorido multivisualização criado, aqueles que desejam imprimir em uma impressora de grande formato e maximizar a largura do substrato precisarão utilizar a impressão 'N-Up', descrita aqui.

Opções de layout de arquivo colorido

Layout 1: fatias da gama

No estilo de fatias de gama completa pelas diversas páginas criadas. O número de páginas escolhidas aqui determina os níveis de luminosidade da gama.

Layout 2: Matiz, saturação e luminosidade

No estilo de matiz, saturação e leveza. O número de páginas escolhidas determinará os níveis de matiz em que o arquivo de cores será dividido.

Layout 3: saturação de cor

No estilo de picos e depressões de gama completa de saturação de cores nas várias páginas criadas.

* Conseguir uma tela para imprimir a partida

Activating colour matching: Achieving a colour match between the screen and your printer The ability to achieve a colour match between your computer screen and your print...

The ability to achieve a colour match between your computer screen and your printer is one AVA’s main strengths, however, there are some very important factors which need be considered before this will happen.  This range from environment to software setting.



The environment

Lighting

The ambient lighting in your studio will govern whether or not you can achieve a good colour match between your screen and your printer.

We recommend you have Osram Biolux 6500k lights installed. These are a daylight bulb. If your lighting is too warm (like the lights you have in your home), all of your prints will appear to have a warm tint to them, whereas your design on the screen will look much cooler, because computer screens generally have a cool/bluish backlight.

Environment

Stained glass windows and brightly coloured walls can cause havoc with your colour match, and therefore should be avoided if you are serious about colour. For the optimum environment, paint your walls a neutral grey colour, and use a similar, or neutral colour for your blinds or curtains.

In AVA

Firstly, ensure you are using the latest version of AVA, and that the AVA, ColourSys and CMS Controller icons in the dock are all for the latest version of the software.
AVA Menu > Settings > Overprinting…


  • Set Averaging to : Best
  • Production Ink Database : If you use a Tonal Database (ToneDB) it should be set in here.  Otherwise this option will be blank.
  • Default layer transparency : Should reflect the transparency of the inks used in your production mill.

Note: Layer transparency can change and you should check with your colleagues what transparencies you should be using. But unless otherwise specified, this should be set to 100%. This will mean your layer order will not affect the appearance of the design.




Go to AVA Menu > Inspectors > Overprint…


  • View Setting : Application
  • Soft proof should be ticked.  This displays the colour on the screen as it will print out with your active printer profile
  • Overprint Method : Reflectance 3.  This is AVA's standard overprinting method.
  • Ink breakdown : Standard
  • n: = 8.5 and c: = 0.5

In the View Menu, Use Dot Gain must be ticked.

In the Layers Palette, the substrate should be set to AVA Printing White, unless otherwise specified by your company.



It is also worth checking whether the Design Gamut Warnings are on, as these cast a tone over your design, and do print when they are on.

In Coloursys

In the Colour Menu, ensure Soft Proof is ticked

In the AVA CMS Controller

Profiles tab

Ensure you have your latest monitor profile set, and the relevant printer profile set.

Viewing Conditions tab

Ensure the Colour Balance values a and b are both set to 0.

The brightness slider bar, which is the one with the sun above it, should be set to 0.000 if you are using a glossy (iMac®) screen. For everything else, you should have it set to -0.030, which is the default setting and can be set by clicking Reset in the bottom left hand side of the window.

Rendering tab

Ensure the rendering is set to Best

Advanced tab

Generally, nothing should be ticked in this window unless otherwise specified by an AVA Technician, however, if you would like more information on these settings please refer to the CMS Controller article.

Proof tab

Generally nothing should be ticked in this window unless otherwise specified by an AVA Technician, but if you would like to read more about this setting, please click here.

If the settings on your computer match those above, and you are still experiencing a problem with your colour match, please consider the following;

Can one of the heads be blocked on your printer?

Do you need to change an ink cartridge?

Have you changed the batch of paper or ink since profiling? If so, maybe re-profiling will help.

If you feel you could improve the colour match within your studio, please do not hesitate to contact AVA Technical Support.



Was this article helpful?


Knowledge Base Software powered by Helpjuice