File a colori a visualizzazione multipla: crea un file a colori dalla gamma di colori della tua stampante

Come utilizzare i colori che sai che la tua stampante può ottenere


Puoi creare file colore in base ai profili del tuo monitor o stampante e specificare il numero di pagine incluse, il layout che il file colore adotterà e i livelli di luminosità richiesti. Questi file di colori sono estremamente utili perché forniscono un file di colori che contiene solo i colori che la tua stampante può ottenere.


Ciò impedisce di utilizzare colori che non sono ottenibili sulla stampante e contribuisce a ottenere una corrispondenza tra schermo e stampa*

  1. In ColourSys , vai su File Menu > Nuovo Multiview Colourfile… Si aprirà la seguente finestra:
  2. Scegli tra i tradizionali modelli CIE La*b* e i più recenti (2008) CIE CAM02 Color Space. Si verificherà una leggera differenza nello spostamento della tonalità tra ciascun modello durante la generazione del file colore.

    Come regola generale, CIE CAM02 genera una fusione molto più uniforme tra i colori mentre CIE La*b* tende ad avere variazioni di colore man mano che i colori diventano più forti (ad esempio dal blu al viola).

  3. Scegli tra tre diverse opzioni di layout del file colore. Ciascuna visualizzazione è descritta più avanti nell'articolo.
  4. Scegli quale gamma di colori utilizzare nel file di colori Multiview.
    • Gamma filtro : scegli di generare colori dalla gamma del monitor, dalla gamma della stampante o da un profilo ICC selezionato come uno della tua produzione. I colori generati rifletteranno direttamente i limiti della gamma selezionati utilizzando il modello di layout scelto

  5. Seleziona la tua tolleranza dE.

    • dE : utilizza la barra di scorrimento per determinare la tua tolleranza Delta E. Più bassa è la tolleranza, meno frammenti appariranno nel file colore, ma saranno più accurati. Maggiore è la tolleranza, maggiore sarà il numero di frammenti visibili nel file di colori risultante, ma potrebbero essere meno accurati

  6. Personalizza la fusione e la divisione dei frammenti di colore generati utilizzando pagine, righe e colonne:
    • Pagine : rifletterà quante pagine verranno generate rispetto alle righe e alle colonne specificate. Ad esempio, se hai solo 8 righe e 8 colonne, non vorrai distribuire i colori su 20 pagine poiché ciò lascerebbe solo pochi colori per pagina. Le pagine riflettono anche determinati attributi a seconda del layout selezionato.
    • Righe : determina i passaggi di fusione e il numero di chip orizzontali. Numeri più piccoli creeranno meno passaggi di fusione tra i chip
    • Colonne : determina i passaggi di fusione e il numero di chip verticali. Numeri più piccoli creeranno meno passaggi di fusione tra i chip

  7. Controlla la gamma da scuro a chiaro in una determinata tonalità del file colore per enfatizzare la saturazione:
    • Luminosità minima : limita il fondo della scala di luminosità, dove 0 corrisponde al bianco
    • Luminosità massima : limita la parte superiore della scala di luminosità, dove 100 corrisponde al nero
    • Max Chroma : i numeri bassi desaturano la tonalità del file colore, spingendo le sfumature verso i pastelli. Il valore 100 rappresenta la saturazione massima su tutta la gamma

  8. Fare clic su OK per generare il file colore utilizzando le impostazioni selezionate, quindi scorrere le pagine utilizzando il consueto navigatore pagine, nella parte superiore del file colore.
  9. Aggiungi un prefisso ai nomi dei chip colore.

Una volta creato il file a colori multivista, coloro che desiderano stampare su una stampante di grande formato e massimizzare la larghezza del substrato dovranno utilizzare la stampa 'N-Up', descritta qui.

Opzioni di layout del file colore

Layout 1: suddivide la gamma

Nello stile di spezzoni di gamma completa attraverso le varie pagine create. Il numero di pagine scelte qui determina i livelli di luminosità della gamma.

Layout 2: tonalità, saturazione e luminosità

Nello stile di tonalità, saturazione e leggerezza. Il numero di pagine scelte determinerà i livelli di tonalità in cui verrà suddiviso il file a colori.

Layout 3: saturazione del colore

Nello stile della gamma completa, i picchi e gli avvallamenti della saturazione del colore attraverso le varie pagine create.

* Raggiungere una corrispondenza tra schermata e stampa

Activating colour matching: Achieving a colour match between the screen and your printer The ability to achieve a colour match between your computer screen and your print...

The ability to achieve a colour match between your computer screen and your printer is one AVA’s main strengths, however, there are some very important factors which need be considered before this will happen.  This range from environment to software setting.



The environment

Lighting

The ambient lighting in your studio will govern whether or not you can achieve a good colour match between your screen and your printer.

We recommend you have Osram Biolux 6500k lights installed. These are a daylight bulb. If your lighting is too warm (like the lights you have in your home), all of your prints will appear to have a warm tint to them, whereas your design on the screen will look much cooler, because computer screens generally have a cool/bluish backlight.

Environment

Stained glass windows and brightly coloured walls can cause havoc with your colour match, and therefore should be avoided if you are serious about colour. For the optimum environment, paint your walls a neutral grey colour, and use a similar, or neutral colour for your blinds or curtains.

In AVA

Firstly, ensure you are using the latest version of AVA, and that the AVA, ColourSys and CMS Controller icons in the dock are all for the latest version of the software.
AVA Menu > Settings > Overprinting…


  • Set Averaging to : Best
  • Production Ink Database : If you use a Tonal Database (ToneDB) it should be set in here.  Otherwise this option will be blank.
  • Default layer transparency : Should reflect the transparency of the inks used in your production mill.

Note: Layer transparency can change and you should check with your colleagues what transparencies you should be using. But unless otherwise specified, this should be set to 100%. This will mean your layer order will not affect the appearance of the design.




Go to AVA Menu > Inspectors > Overprint…


  • View Setting : Application
  • Soft proof should be ticked.  This displays the colour on the screen as it will print out with your active printer profile
  • Overprint Method : Reflectance 3.  This is AVA's standard overprinting method.
  • Ink breakdown : Standard
  • n: = 8.5 and c: = 0.5

In the View Menu, Use Dot Gain must be ticked.

In the Layers Palette, the substrate should be set to AVA Printing White, unless otherwise specified by your company.



It is also worth checking whether the Design Gamut Warnings are on, as these cast a tone over your design, and do print when they are on.

In Coloursys

In the Colour Menu, ensure Soft Proof is ticked

In the AVA CMS Controller

Profiles tab

Ensure you have your latest monitor profile set, and the relevant printer profile set.

Viewing Conditions tab

Ensure the Colour Balance values a and b are both set to 0.

The brightness slider bar, which is the one with the sun above it, should be set to 0.000 if you are using a glossy (iMac®) screen. For everything else, you should have it set to -0.030, which is the default setting and can be set by clicking Reset in the bottom left hand side of the window.

Rendering tab

Ensure the rendering is set to Best

Advanced tab

Generally, nothing should be ticked in this window unless otherwise specified by an AVA Technician, however, if you would like more information on these settings please refer to the CMS Controller article.

Proof tab

Generally nothing should be ticked in this window unless otherwise specified by an AVA Technician, but if you would like to read more about this setting, please click here.

If the settings on your computer match those above, and you are still experiencing a problem with your colour match, please consider the following;

Can one of the heads be blocked on your printer?

Do you need to change an ink cartridge?

Have you changed the batch of paper or ink since profiling? If so, maybe re-profiling will help.

If you feel you could improve the colour match within your studio, please do not hesitate to contact AVA Technical Support.



Was this article helpful?


Knowledge Base Software powered by Helpjuice